1000 ppm colloidal silver gel 4 oz ounces nano sized - no scents or colors
$16.97 inc. tax
Bulk Buying Options
single: $16.97
2 up to 2: $15.00 per item
3 up to 3: $14.50 per item
4 up to 5: $13.50 per item
6 up to 7: $13.00 per item
8 up to 10: $11.00 per item
11 up to 15: $9.00 per item
Colloidal Silver GEL
1000 ppm
4 fluid ounces of gel
This is made every few weeks fresh so you will never get old stock.
Made with 10,000 volts AC to produce the smallest particle size and very stable.
Water undergoes reverse osmosis twice, then distilled and tested at 0 ppm. Only glass made in USA is used in processing.
Colloidal content is 20 %
Ionic content is 80%
True 4 fluid ounces, non BPA container
It starts at 300ppm and was increased to 1000ppm and still kept nano in size by preventing binding of silver ions.
It has been treated to get rid of dark silver oxide and so this 1000ppm is lighter in color. It is boosted to 1000ppm with
nano metallic silver powder, so not all of it was made electrically. However, the powder was converted into ions.
It is also stable so it will not darken up on you or turn yellow which is a sign that the silver ions are combining with each other.
For deeper penetration you can apply Glade Press'NSeal cling wrap which can be found at any big grocery. This works great and
can be applied for several hours for even greater penetration into skin.
Is used as an anitbacterial, antiviral, antifungal, and in various skin rashes, burns, and acne.
This was made very lightweight. Just apply to skin in a light coat and then reapply in a few minutes as it absorbs into skin fast.
pH is 5.3 so it will hydrate the skin and not dry it out. If you need it to be thinner it can be diluted with distilled water.
Each batch is labeled to the true ppm and true makeup of colloidal and ionic nano silver ratio.
Only nano silver for colloidal and ionic is produced and done so very slowly. Weights of silver rods before and after are used to determine ppm, taking into account periodic silver wasted from cleaning rods. Batches are made over 300 ppm in case of any discrepancy. We also sell the liquid colloidal silver too and true ppm is very important to us. A few steps are needed to keep the particle size small and go past 30ppm. Current version is 90% nano, but no large particles.
Ingredients: 99.99% silver, distilled water, carbomer 940, polysorbate 20, TEA . No added scents or colors.
Any of the gels or creams listed can be stored in the refrigerator inside a ziplock bag for long term storage if needing it stabilized more than 3 years. Though don't freeze it.
Made in USA.
1000 ppm
4 fluid ounces of gel
This is made every few weeks fresh so you will never get old stock.
Made with 10,000 volts AC to produce the smallest particle size and very stable.
Water undergoes reverse osmosis twice, then distilled and tested at 0 ppm. Only glass made in USA is used in processing.
Colloidal content is 20 %
Ionic content is 80%
True 4 fluid ounces, non BPA container
It starts at 300ppm and was increased to 1000ppm and still kept nano in size by preventing binding of silver ions.
It has been treated to get rid of dark silver oxide and so this 1000ppm is lighter in color. It is boosted to 1000ppm with
nano metallic silver powder, so not all of it was made electrically. However, the powder was converted into ions.
It is also stable so it will not darken up on you or turn yellow which is a sign that the silver ions are combining with each other.
For deeper penetration you can apply Glade Press'NSeal cling wrap which can be found at any big grocery. This works great and
can be applied for several hours for even greater penetration into skin.
Is used as an anitbacterial, antiviral, antifungal, and in various skin rashes, burns, and acne.
This was made very lightweight. Just apply to skin in a light coat and then reapply in a few minutes as it absorbs into skin fast.
pH is 5.3 so it will hydrate the skin and not dry it out. If you need it to be thinner it can be diluted with distilled water.
Each batch is labeled to the true ppm and true makeup of colloidal and ionic nano silver ratio.
Only nano silver for colloidal and ionic is produced and done so very slowly. Weights of silver rods before and after are used to determine ppm, taking into account periodic silver wasted from cleaning rods. Batches are made over 300 ppm in case of any discrepancy. We also sell the liquid colloidal silver too and true ppm is very important to us. A few steps are needed to keep the particle size small and go past 30ppm. Current version is 90% nano, but no large particles.
Ingredients: 99.99% silver, distilled water, carbomer 940, polysorbate 20, TEA . No added scents or colors.
Any of the gels or creams listed can be stored in the refrigerator inside a ziplock bag for long term storage if needing it stabilized more than 3 years. Though don't freeze it.
Made in USA.
Product Code: 1000-csgei
Product Condition: New